2019 Mitsubishi MV1200S

Machine Travels: X x Y x Z in (mm)15.7 x 11.8 x 8.7 (400 x 300 x 220)Maximum Workpiece Dimensions: W x D x H in (mm)31.9 x 27.6 x 8.5 (810 x 700 x 215)Max. Submerged Workpiece Weight: lb (kg)1102 (500)Table Dimensions: in (mm)25.2 x 17.7 (640 x 450)U/V Travels (from center): in (mm)±2.4 x ±2.4 (±60 x ±60)Taper Angle @ Thickness: in (mm)15 deg.@ 8.0 (15 deg.@ 200)Wide Angle Taper (Optional Guides Required)45 deg. @ 1.8″ 45mm (No AT Possible)Table Rapid Feed Speed: in/min (mm/min)51.2 (1300)Power SupplyV350-VMinimum Drive Unit / Resolution0.000002 / 2 µin ( 0.00005 / 50nm)User Program Storage [Hard Disk Size]1 GB [32 GB CFAST Card Size]Wire Diameter Possible: in (mm)0.004~0.012 (0.1~0.3)Minimum Start Hole Diameter: in (mm)0.02 (0.5)Max. Wire Spool size On Machine / Cabinet STD: lb (kg)22 / 44 (10 / 20)Filters / Type2 / PaperFilter Tank Capacity: gal (L)145 (550)Machine System Dimensions: in (mm)79.7 x 106.4 (2025 x 2702)Machine Installed Height: in (mm)79.3 (2015)Machine System Weight: lb (kg)5952 (2700)Fluid System Weight: lb (kg)Included with machinePower Requirements [KVA]200-230V [13.5] Built in AVRCompressed Air Requirements2.7 cu.ft./min. @ 71~100 psi